3com WX4400 3CRWX440095A User Manual

„

„

„

Shows the tunnels from the wireless LAN switch where you type the 
command.

Syntax — 

Defaults — None.

Access — Enabled

History —Introduced in MSS Version 3.0.

Examples — To display all tunnels from a WX switch to other WX 
switches in the Mobility Domain, type the following command. 

WX4400# display tunnel

VLAN 

Local Address 

Remote Address  State 

Port  LVID  RVID

--------------- --------------- --------------- ------- ----- ----- -----

vlan-eng 

192.168.14.2 

192.168.14.4    DORMANT  1024  4096 

130

Table 24 describes the fields in the display.

Hits

Number of packets whose source MAC address was a 
client in this VLAN, and whose destination MAC address 
was one of those listed under Permit MAC.

Table 23   Output for display security 12-restrict

Table 24   Output for display tunnel

VLAN 

VLAN name.

Local Address

IP address of the local end of the tunnel. This is the system 
IP address of the wireless access switch where you enter 
the command.