3com WX4400 3CRWX440095A User Manual

Displays the current status of countermeasures against rogues in the 
Mobility Domain.

Syntax — 

Defaults — None.

Access — Enabled.

History —Output no longer lists rogues for which countermeasures have 
not been started in MSS Version 4.0.

Usage — This command is valid only on the seed switch of the Mobility 
Domain. 

Examples — The following example displays countermeasures status for 
the Mobility Domain:

WX4400# display rfdetect countermeasures

Total number of entries: 190

Rogue MAC         Type  Countermeasures    WX-IPaddr       Port/Radio

                        Radio Mac                              /Channel

----------------- ----- ------------------ --------------- -------------

00:0b:0e:00:71:c0 intfr  00:0b:0e:44:55:66 10.1.1.23

ap 4/1/6

00:0b:0e:03:00:80 rogue  00:0b:0e:11:22:33 10.1.1.23

ap 2/1/11

Typ

Classification of the rogue device:

„

rogue—Wireless device that is on the network but is not 
supposed to be on the network. 

„

intfr—Wireless device that is not part of your network and 
is not a rogue, but might be causing RF interference with 
MAP radios. 

„

known—Device that is a legitimate member of the 
network. 

Dst

MAC addressed to which the last 802.11 packet detected 
from the client was addressed.

Last Rogue Status 
Check

Number of seconds since the WX switch looked on the air for 
the AP with which the rogue client is associated. The switch 
looks for the client’s AP by sending a packet from the wired 
side of the network addressed to the client, and watching the 
air for a wireless packet containing the client’s MAC address.

Table 104   display rfdetect clients mac Output (continued)