Microsoft RKH-00041 User Manual

Improper use of batteries may result in battery fluid leakage,

overheating, or explosion. risk of explosion if batteries are 

replaced by an incorrect type. use and replace only with 

correct size and type of batteries. Released battery fluid is

corrosive and may be toxic. It can cause skin and eye burns, 

and is harmful if swallowed. to reduce the risk of injury:
•  Keep batteries out of reach of children.
•  Do not heat, open, puncture, mutilate, or dispose of 

batteries in fire.

•  use only alkaline (not rechargeable) batteries, type aa for 

best performance.

•  Do not mix new and old batteries or batteries of different 

types.

•  Do not allow metal objects to touch the battery terminals 

on the device; they can become hot and cause burns.

•  remove the batteries if they are worn out or before 

storing your controller for an extended period of time. 

•  If a battery leaks, remove all batteries, taking care to 

keep the leaked fluid from touching your skin or clothes.

If fluid from the battery comes into contact with skin

or clothes, flush skin with water immediately. Before

inserting new batteries, thoroughly clean the battery 

compartment with a damp paper towel, or follow the 

battery manufacturer’s recommendations for cleanup.

•  Dispose of batteries in accordance with local and national 

disposal regulations (if any).

Before boarding any aircraft or packing the wireless 

controller in luggage that will be checked, remove 

any batteries from the wireless controller. the wireless 

controller can transmit radio frequency (rF) energy, much 

like a cellular telephone, whenever batteries are installed.

to turn your console and controller on, press and 

hold the Xbox Guide button on your controller. to 

turn on just your console, touch the console power 

button lightly. 

to connect additional wireless controllers to your 

console, or to connect your controller to a different 

console, follow the steps below. to connect a 

wireless controller to your console: 
To connect a wireless controller to your console:

1  press and hold down the Xbox Guide button 

until the controller turns on.

2  Make sure the console is turned on. If not, 

touch the console power button and allow the 

console to completely start up. when the Xbox 

Dashboard or inserted disc runs, the console is 

ready.

3  press the connect button on the console and 

wait for the console lights to spin.

4  press the connect button on the controller and 

wait for the controller lights to spin.

after the lights on the controller and console spin 

and flash once, the controller is connected.

For information about how to use the controller 

with games, see your game instructions. when 

playing, your controller’s position is indicated by 

one of four lights around the Xbox Guide button, 

and you can press the Xbox Guide button to show 

the Xbox Guide at any time.