Polycom SIP 2.2.0 User Manual
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 40
e
Locate the voIpProt parameter.
Set the voIpProt.server.x.transport attribute to TCPpreferred or
Set the voIpProt.server.x.transport attribute to TCPpreferred or
TLS.
Your selection depends on the LCS configuration.
Your selection depends on the LCS configuration.
f
Set the voIpProt.server.x.address to the LCS address.
For example, voIpProt.server.1.address = "lcs2005.local"
For example, voIpProt.server.1.address = "lcs2005.local"
g
Set the voIpProt.SIP.lcs attribute to 1.
h
(Optional) If SIP forking is desired, set voIpProt.SIP.ms-forking
attribute to 1.
Refer to
Refer to
on page
i
Save the modified sip.cfg configuration file.
2.
Modify the phone1.cfg configuration file as follows:
a
Open phone1.cfg in an XML editor.
b
Locate the registration parameter.
c
Set the reg.1.address to the LCS address.
For example, reg.1.address = "7778"
For example, reg.1.address = "7778"
d
Set the reg.1.server.y.address to the LCS server name.
e
(Optional) Set the reg.1.server.y.transport attribute to
TCPpreferred or TLS.
Your selection depends on the LCS configuration.
Your selection depends on the LCS configuration.
f
Set reg.1.auth.userId to the phone's LCS username.
For example, reg.1.auth.userId = "jbloggs"
For example, reg.1.auth.userId = "jbloggs"
g
Set reg.1.auth.password to the LCS password.
For example, reg.1.auth.password = "Password2"
For example, reg.1.auth.password = "Password2"
h
Locate the roaming_buddies attribute.
i
Set the roaming_buddies.reg element to 1.
Refer to
Refer to
.
j
Locate the roaming_privacy attribute.
k
Set the roaming_privacy.reg element to 1.
Refer to
Refer to
on page
.
l
Save the modified phone1.cfg configuration file.
Note
The TLS protocol is not supported on SoundPoint IP 300 and 500 phones.