Polycom 7000 User Manual

 

Call Server Configuration

Polycom, Inc. 

263

////////////////////////////////
// Match against individual VMRs.  ACCEPT if any of them matches.
//
if (0 <= whitelist_vmrs.indexOf(getConferenceRoomOrID()))
{
  prefix = "11";
}
DIAL_STRING = prefix + DIAL_STRING;

See also: 

A hunt group is a set of endpoints that share an alias or aliases. Hunt groups can be used to define a dial 
string shared by a group of people, such as a technical support number. When the Polycom RealPresence 
DMA system Call Server resolves a dial string to the hunt group’s alias, it selects a member of the group 
and tries to terminate the call to that member. 

The system selects hunt group members in round-robin fashion. It skips members that are in a call or have 
unconditional call forwarding enabled. If the selected group member rejects the call or doesn’t answer 
before the timeout, the system tries the next group member. 

If all members have been attempted (or skipped) without successfully terminating the call, the system sends 
the BUSY message to the caller. 

Registered endpoints can add themselves to a hunt group by dialing the vertical service code (VSC) for 
joining (default is *71) followed by the hunt group alias. They can leave a hunt group by dialing the VSC for 
leaving (default is *72) followed by the hunt group alias. An endpoint can belong to multiple hunt groups. 

The Hunt Groups page lists the defined hunt groups and lets you add, edit, and delete hunt groups. The 
following table describes the fields in the list. 

See also: 

Name Hunt 

group 

name. 

Description 

Brief description of the hunt group. 

Aliases 

The aliases (dial strings) that resolve to this hunt group. 

Members 

The endpoints included in the hunt group.

Enabled 

Indicates whether the hunt group is being used.