Polycom 7000 User Manual
Call Server Configuration
Polycom, Inc.
278
See also:
Edit Vertical Service Code Dialog
The Edit Vertical Service Code dialog lets you edit a call forwarding or hunt group service invoked when
callers dial the vertical service code (VSC) for that service followed by the alias. These services are included
on the Prefix Service page and can’t be deleted. But you can disable them or change their names,
descriptions, or VSCs (shown in the Prefix Range column of the Prefix Service page). If you change the
VSCs, be sure to inform users of the change.
callers dial the vertical service code (VSC) for that service followed by the alias. These services are included
on the Prefix Service page and can’t be deleted. But you can disable them or change their names,
descriptions, or VSCs (shown in the Prefix Range column of the Prefix Service page). If you change the
VSCs, be sure to inform users of the change.
The following table describes the fields in the dialog.
See also:
Embedded DNS
In a superclustered configuration, the clusters that make up the supercluster automatically take over for
each other in the event of an outage. In order to gain the full benefit of this feature, however, the endpoints
that are registered to each cluster must re-register to a new cluster when the new cluster takes over.
each other in the event of an outage. In order to gain the full benefit of this feature, however, the endpoints
that are registered to each cluster must re-register to a new cluster when the new cluster takes over.
This can be accomplished by specifying the gatekeeper or SIP proxy that each endpoint will register to as
a site’s domain name, rather than an IP address. Then, when there is a failover, the DNS A record for that
site’s domain name can be mapped to a different IP address, changing the Call Server that each endpoint
is registered to.
a site’s domain name, rather than an IP address. Then, when there is a failover, the DNS A record for that
site’s domain name can be mapped to a different IP address, changing the Call Server that each endpoint
is registered to.
The embedded DNS capability of the Polycom RealPresence DMA system automates this procedure.
Each Polycom RealPresence DMA server hosts its own embedded DNS server. It publishes a DNS CNAME
record for each site. That CNAME record maps to the active cluster with which endpoints at the site should
register. Whenever responsibility for the site moves from one cluster to another, the change is automatically
published by the embedded DNS server. Endpoints will automatically re-register to the correct cluster.
record for each site. That CNAME record maps to the active cluster with which endpoints at the site should
register. Whenever responsibility for the site moves from one cluster to another, the change is automatically
published by the embedded DNS server. Endpoints will automatically re-register to the correct cluster.
Column
Description
Type
The type of service. Display only.
Name
A display name for this service.
Code
The vertical service code (VSC) for this service. Must consist of an
asterisk/star (*) followed by two digits.
Registered endpoints can activate this feature by dialing the VSC followed by
the alias. They can deactivate it by dialing the VSC alone.
asterisk/star (*) followed by two digits.
Registered endpoints can activate this feature by dialing the VSC followed by
the alias. They can deactivate it by dialing the VSC alone.
Description
Brief description of the service.
Enabled
Clearing this check box lets you turn off the service.