Polycom 7000 User Manual
Local Cluster Configuration
Polycom, Inc.
75
See also:
Edit Guest Port Dialog
The Edit Guest Port dialog lets you edit an Unauthorized ports list entry in the SIP Settings section of
the Signaling Settings page.
the Signaling Settings page.
The following table describes the fields in the Edit Guest Port dialog.
Require mutual authentication
(validation of client certificates)
(validation of client certificates)
For TLS transport, check this box to enable mutual TLS, requiring callers to
present a valid certificate.
Note: This setting is enabled and locked if Unlock SIP Settings mutual
authentication option on the Signaling Settings page is unchecked on the
Security Settings page. See
present a valid certificate.
Note: This setting is enabled and locked if Unlock SIP Settings mutual
authentication option on the Signaling Settings page is unchecked on the
Security Settings page. See
Authentication
Select one of the following:
•
•
None — The system doesn’t issue authentication challenges or check
authentication credentials for calls to this port.
authentication credentials for calls to this port.
•
Authentication — The system issues authentication challenges and
checks authentication credentials for calls to this port.
checks authentication credentials for calls to this port.
The settings on the Device Authentication page (see
) determine the realm used for authentication and
whether the Call Server responds to unauthenticated requests with
401 (Unauthorized) or 407 (Proxy Authentication Required).
401 (Unauthorized) or 407 (Proxy Authentication Required).
•
Block — The system blocks calls to this port.
Field
Description
Port
The SIP signaling port number for this entry.
This is the port number that an SBC is configured to use for untrusted calls to
the RealPresence DMA system via the transport specified below.
This is the port number that an SBC is configured to use for untrusted calls to
the RealPresence DMA system via the transport specified below.
Transport
To use this guest port for unencrypted SIP connections, select either TCP or
UDP/TCP from the list. To use this port for encrypted SIP connections, select
TLS.
UDP/TCP from the list. To use this port for encrypted SIP connections, select
TLS.
Field
Description