Panasonic C32T User Manual
10
FP0 PROFIBUS DP Slave or Remote I/O Unit
For Cost Effective Control of Distributed Field Device
The FP0 DPS2 can operate either as a DP Slave module or as a remote I/O
system to which different decentralised inputs and outputs can be connected.
A DIP switch can be used to switch between the two modes:
system to which different decentralised inputs and outputs can be connected.
A DIP switch can be used to switch between the two modes:
Mode 1:
DP Slave module. Connect the FP0 or FP
DP Slave module. Connect the FP0 or FP
Σ (Sigma) CPU + expansion modules
to the PROFIBUS network.
Mode 2:
Remote I/O. Connect up to three expansion modules without CPU to the
PROFIBUS network.
Remote I/O. Connect up to three expansion modules without CPU to the
PROFIBUS network.
In remote I/O mode, the unit can be connected to any PLC which offers a
PROFIBUS communication interface, making it totally independent of
Panasonic PLCs.
PROFIBUS communication interface, making it totally independent of
Panasonic PLCs.
Item
Description
Type designation
PROFIBUS standards complied with
FP0 DP Slave unit, Ord. No. FP0DPS2
EN 50170, DIN 19245 Part 1 and Part 3
Baud rates
9.6 / 19.2 / 93.75 / 187.5 / 500 / 1,500 / 3,000 / 6,000 / 12,000 Kbaud
automatic baud rate detection
Range of addresses that can be set
0..125
PROFIBUS connection
Configuration
9-pin Sub-D connector
2 words input / 2 words output, up to 6 words input / 6 words output if no other expansion is connected
Remote I/O, max. 3 FP0 expansion units
FP0 communication
Via FP0 system bus
Power supply
24VDC (21.6VDC … 26.4VDC)
Max. power consumption
100mA
FP0-DPS specifications
DP-Slave
Remote I/O
PLC
(Master)
PLC
(Slave)
Remote I/O
(Slave)
FP0 DP Slave
FP (Sigma) DP Slave
DP Slave Remote I/O
Configuration with digital I/O
up to 96 transistor I/O or up to
48 relay I/O are possible
DP Slave Remote I/O Configuration
with analogue I/O up to 12 outputs
or 24 analogue inputs or up to 24
thermocouple inputs are possible
thermocouple inputs are possible
FP2 DP or FMS Master
Specially by developed software tools ensure
easy configuration and start-up of PROFIBUS
products.
easy configuration and start-up of PROFIBUS
products.
PROFIBUS DP-Configurator AFP86910
07/2007