Panasonic AG-HMR10P User Manual
Preparation
Description
of parts
23
Charging
The battery does not come ready charged when the portable recorder is purchased. Charge the battery
before use.
It is recommended that you keep one extra battery as a spare.
before use.
It is recommended that you keep one extra battery as a spare.
1
Connect the power cable to the AC adapter.
Disconnect the DC cable.
(Battery cannot be charged if DC cable is
connected.)
(Battery cannot be charged if DC cable is
connected.)
Insert until fully in place.
2
Insert the battery.
Charging lamp [CHARGE]
Align the battery with the
mark and insert fully.
Charging lamp
■
On: Charging in progress
Off: Charging complete
Flashing: See below
Off: Charging complete
Flashing: See below
If charging lamp is flashing
■
Check that there is no dirt, dust, or other
substances attached to the connectors on the
battery or AC adapter, and ensure that the adapter
has been connected correctly.
substances attached to the connectors on the
battery or AC adapter, and ensure that the adapter
has been connected correctly.
If there is dirt or dust on the connectors,
•
disconnect the power plug from the socket before
cleaning.
If the charging lamp continues to flash, there
cleaning.
If the charging lamp continues to flash, there
•
may be a fault with the battery or the AC adapter.
Please consult with the place of purchase.
Please consult with the place of purchase.
Depending on the country and region, the actual
configuration of the power cable, plug, and
power outlet may differ from those shown in
these operating instructions.
configuration of the power cable, plug, and
power outlet may differ from those shown in
these operating instructions.
Power sources
(Continued on the next page)