Panasonic AG-HMR10P User Manual

Page of 106
32
1
  Press the portable recorder’s [POWER] 
button for 2 seconds or longer to turn on 
the power. (Page 26)
2
  Press the [MENU] button.
Using the setup menus (Page 29)
3
  Select [DISPLAY SETUP] → [LCD SET] → 
[YES], and then press the [ENTER] button. 
4
 Press   
 to select an item, and then 
press the [ENTER] button.
LCD COLOR LEVEL:  Adjusts the color density of 
the screen.
LCD BRIGHTNESS:   Adjusts the brightness of the 
screen.
LCD CONTRAST: 
 Adjusts the contrast of the 
screen.
Be careful because if all the LCD monitor 
• 
adjustment values are set to their lowest levels, it 
becomes difficult to see the menu screens.
5
 Press     to set the item value, and then 
press the [ENTER] button.
6
  Press the [MENU] button to close the menu.
Adjusting the LCD monitor
Slight time errors may occur, so check that the 
• 
time is correct before recording.
When using the recorder overseas, do not set 
• 
the [CLOCK SET] time to the local time, but 
instead enter the time difference from Greenwich 
Mean Time in [TIME ZONE]. (Page 92)
Setting the date and time/Recharging the built-in battery/Adjusting the LCD monitor (continued)
Recharging the built-in battery
The recorder’s built-in battery saves the date and 
time.
When “LOW INTERNAL BATTERY” is displayed 
even when the date and time are set, it means 
that the built-in battery is low. Recharge using the 
following procedure.
Reset the date and time after the battery is fully 
recharged.
1
  Connect the AC adapter to the portable 
recorder. (Page 25)
Leave off the power of the portable recorder.
• 
2
  Leave the portable recorder like this for 
about 4 hours.
The built-in battery recharges during this 
• 
time.
Check the time code and menu operations 
• 
after recharging.
If the date and time are still not memorized after 
recharging, the built-in battery must be replaced. 
Consult the place of purchase.