Panasonic AG-HMR10P User Manual

33

Recording stops if the card slot cover is 

• 

opened during recording.

Before removing the SD Memory Card, 

• 

ensure that the SD Memory Card access 
lamp is not flashing orange.

To insert:  Insert the card with the label facing up, 

and push until it clicks firmly into place.

To remove:  Press the center of the SD Memory 

Card so that it pops out slightly, and 
then pull the card straight outwards.

Do not remove the SD Memory Card or switch off 

• 

the power in the following circumstances. Doing 
so may damage your SD Memory Card.

 1) 

 While the SD Memory Card access lamp is 
still flashing orange after an SD Memory Card 
has been inserted.

 2) 

 While the SD Memory Card access lamp is 
flashing, such as during recording or during 
recording finalization.

Ensure that the cover firmly clicks into place.

• 

Always format SD Memory Cards that have 

• 

been used in other devices when first using 
them with this portable recorder. (Page 34)
If the system frequency of the portable 

• 

recorder is changed, it will not be possible to 
use an SD Memory Card. Before using a card, 
format it with the current system frequency 
settings.
When a card is formatted, all of its recorded 

• 

data will be erased, and it will not be 
subsequently possible to restore this data. 
Save any valuable data onto your computer or 
other storage media prior to formatting.
If “CHECK CARD” is displayed on the LCD 

• 

monitor screen, remove the SD Memory Card 
and insert it again.

Move the write-protect switch on the SD Memory 
Card to the “LOCK” position to prevent recorded 
contents being accidentally erased from the card.