Panasonic AG-HMR10P User Manual
Recording
47
Turning off the LCD monitor screen
(LCD OFF)
The LCD monitor screen can be turned off.
1
While pressing the [SHIFT/EXEC] button,
press the [USER] button.
Press the same buttons again to cancel the
•
setting.
The setting is canceled when the power is
The setting is canceled when the power is
•
turned off.
When the LCD monitor screen is off, in
When the LCD monitor screen is off, in
•
addition to the buttons for turning the screen
back on, the [POWER] button and [REC/
PAUSE] button can also be operated.
back on, the [POWER] button and [REC/
PAUSE] button can also be operated.
Adjusting the recording level of the
input audio (MIC LEV)
The recording level of the input audio from the
microphone connector can be adjusted.
microphone connector can be adjusted.
1
While pressing the [SHIFT/EXEC] button,
press the [AUDIO MON/ADV + ] or
[AUDIO MON/ADV - ] button.
AUDIO MON/ADV + : Raises the input level.
AUDIO MON/ADV - : Lowers the input level.
While adjusting, refer to the level display for
microphone input adjustment on the LCD
monitor screen.
[AUDIO MON/ADV - ] button.
AUDIO MON/ADV + : Raises the input level.
AUDIO MON/ADV - : Lowers the input level.
While adjusting, refer to the level display for
microphone input adjustment on the LCD
monitor screen.
<When the AG-HCK10G camera head is connected>
<When the microphone connector is connected>
Check the recording volume level prior to
•
shooting.
The recording level is set approximately 8 dB
The recording level is set approximately 8 dB
•
higher than Panasonic broadcasting camera-
recorders (AJ series products).
When an external microphone is connected
recorders (AJ series products).
When an external microphone is connected
•
to the microphone terminal, the input audio
switches automatically to the external
microphone.
When an external microphone is not
switches automatically to the external
microphone.
When an external microphone is not
•
connected to the microphone terminal, the
input audio is selected as follows.
CAM mode: Built-in microphone of the AG-
input audio is selected as follows.
CAM mode: Built-in microphone of the AG-
HCK10G camera head (optional)
SDI mode: HD-SDI embedded audio signal
Color bar
By selecting [INT SG] → [ON] in the [RECORDING
SETUP] setup menu, you can display a color bar
during REC mode, which is useful when adjusting
the image quality of a television or external
monitor.
SETUP] setup menu, you can display a color bar
during REC mode, which is useful when adjusting
the image quality of a television or external
monitor.
While the color bar is displayed, a test tone of
•
1 kHz∗ will be output from the headphone
terminal and built-in speaker. (However, in
CAM mode there is no output from the built-in
speaker.)
terminal and built-in speaker. (However, in
CAM mode there is no output from the built-in
speaker.)
∗
When [SYSTEM FREQ] is set to [50Hz],
a test tone of 997 Hz is output.
a test tone of 997 Hz is output.
The color bar can be recorded by pressing the
•
[REC/PAUSE] button.
The function is not canceled even when
The function is not canceled even when
•
the power is turned off. To cancel the color
bar display, select [INT SG] → [OFF] in the
[RECORDING SETUP] setup menu.
To output the color bar from the SDI OUT
terminal, select [SDI EE SEL] → [NORMAL] in
the setup menu [AV OUT SETUP].
bar display, select [INT SG] → [OFF] in the
[RECORDING SETUP] setup menu.
To output the color bar from the SDI OUT
terminal, select [SDI EE SEL] → [NORMAL] in
the setup menu [AV OUT SETUP].
Time stamp function
The date and time of recording can be recorded on
the video images.
Select [TIME STAMP] → [ON] in the [RECORDING
SETUP] setup menu.
When [TIME STAMP] is [ON],
the video images.
Select [TIME STAMP] → [ON] in the [RECORDING
SETUP] setup menu.
When [TIME STAMP] is [ON],
R
is displayed on
the LCD monitor.
R
•
itself is not recorded on the video images.
The size and position of the date and time
•
characters recorded on the image will vary
depending on the recording format.
The size and position of the date and time
depending on the recording format.
The size and position of the date and time
•
characters recorded on the image in external
output displays may vary from the displays on the
LCD monitor.
The recorded date and time display will follow the
output displays may vary from the displays on the
LCD monitor.
The recorded date and time display will follow the
•
[DATE/TIME] setting in [DISPLAY SETUP].
When [DATE/TIME] is set to [OFF], the date and
time of recording are not recorded even if [TIME
STAMP] is set to [ON].
To avoid date and time displays overlapping
When [DATE/TIME] is set to [OFF], the date and
time of recording are not recorded even if [TIME
STAMP] is set to [ON].
To avoid date and time displays overlapping
•
when clips with time stamps recorded are played
with this portable recorder, select [DATE/TIME]
→ [OFF] in the [DISPLAY SETUP] setup menu.
with this portable recorder, select [DATE/TIME]
→ [OFF] in the [DISPLAY SETUP] setup menu.