Panasonic AG-HMR10P User Manual

Page of 106
56
Uploading the metadata 
(META DATA)
You can perform any of the following operations.
If necessary, perform preparations prior to the 
operation.
Loading the metadata
Insert the SD Memory Card on which the 
• 
metadata is recorded into the portable recorder. 
(For a description of the clip metadata, 
see page 55.)
Selecting whether to record the metadata 
on the SD Memory Card
Initializing the metadata inside the portable 
recorder
Displaying the metadata inside the portable 
recorder
1
  Press the [MODE] button to select REC 
mode.
Operation modes (Page 28)
2
  Press the [MENU] button.
Using the setup menus (Page 29)
3
 Press   
 to select [META DATA], and 
then press the [ENTER] button or  .
4
 Press   
 to select an item, and then 
press the [ENTER] button.
CARD READ:
   The metadata that is set on the SD Memory 
Card is loaded onto the portable recorder. 
Press the [ENTER] button to select the 
metadata to be loaded, select whether or not 
the metadata is to be loaded (YES/NO), and 
then press the [ENTER] button.
Up to 10 items of metadata on the SD 
 
·
Memory Card can be displayed, starting 
from the most recent creation date.
If characters other than single-byte 
 
·
alphanumeric characters are used in the 
metadata file name that is loaded, they are 
displayed as “∗”.
RECORD:
   Sets whether to record the metadata 
that is loaded onto the portable recorder 
simultaneously on the SD Memory Card.
Select whether or not to record (ON/OFF), 
and then press the [ENTER] button. 
The factory default setting for this mode is 
[OFF].
USER CLIP NAME:
   The USER CLIP NAME recording method is 
selectable. See the next item for details.
CLIP COUNT RESET:
   Resets the COUNT value to 1. 
Select whether or not to reset (YES/NO), and 
then press the [ENTER] button.
META DATA PROP:
   Select [YES] to display the metadata that 
has been recorded on the portable recorder.
META INITIAL SET:
   Initializes the metadata that has been 
recorded on the portable recorder. 
Select whether or not to initialize (YES/NO), 
and then press the [ENTER] button.
5
  Press the [MENU] button to close the menu.
Clip metadata (continued)