Panasonic AG-HMR10P User Manual

82

Adjusts the synchro scan shutter speed used for shooting images on a TV 
screen, etc.

When   

or   is pressed and held, the settings change at a faster rate.

 When [SYSTEM FREQ] is set to [59.9Hz]
60P/60i:

• 

  1/60.0...1/250.0 (Factory default setting is 1/60.0)

• 

  1/30.0…1/48.0…1/250.0

• 

  1/24.0…1/48.0…1/250.0

 When [SYSTEM FREQ] is set to [50Hz]
50P/50i:

• 

  1/50.0...1/250.0 (Factory default setting is 1/50.0)

• 

  1/25.0…1/48.0…1/250.0

Adjusts the level of the image outline correction (in the horizontal and vertical 
directions).
-7…0…+7

Adjusts the level of outline correction in the vertical direction.
-7…0…+7

Adjusts the level of noise reduction for the detail signal.
-7…0…+7
Set to – for a clearer image. The noise will increase slightly.
Set to + to reduce noise.

Adjusts the chroma level.
-7…0…+7

Makes fine adjustments to the chroma phase.
-7…0…+7

Makes fine adjustments to the color temperature.
-7…0…+7

Adjusts the master pedestal (black level of the image) that is used as the basis 
for images.
-15…0…+15

Sets the desired auto iris level.
-10…0…+10

Sets the DRS (Dynamic Range Stretcher) function.
The dynamic range can be expanded by compressing the level of the video 
signals in high-brightness areas where overexposure occurs during normal 
shooting.
OFF, 1, 2, 3

The higher the setting, the higher the compression level of the high-brightness 

• 

areas.
The higher the setting, the greater the noise in the darker areas.

• 

        indicates the factory default setting.

When the [SYSTEM FREQ] (Page 92) setting in [OTHER FUNCTIONS] is changed, the [SYNCRO SCAN] 
(Page 82), [REC FORMAT] (Page 84) and [HDMI OUT SEL] (Page 87) settings are changed to the factory 
default.