Panasonic AG-HMR10P User Manual
88
Setup menu list (continued)
DISPLAY SETUP
Item
Display
mode
Description of settings
ZEBRA
CAM
Sets the level of the zebra pattern that is displayed on the LCD monitor screen.
OFF, 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%
OFF, 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%
SAFETY ZONE
CAM
Sets the display method for the safety zone. (Page 75)
90%, 4:3, OFF
90%, 4:3, OFF
FOCUS BAR
CAM
Sets whether to display the focus assist bar.
ON OFF
Select [ON] to display the focus assist bar.
ON OFF
Select [ON] to display the focus assist bar.
REC COUNTER SDI/CAM
Selects the counter operation during recording.
TOTAL: Continues counting until the counter is reset.
CLIP:
TOTAL: Continues counting until the counter is reset.
CLIP:
Resets the counter at the start of recording to count the recording time
for each clip.
for each clip.
In PB mode, operation is always in CLIP mode.
•
OUTPUT OSD
SDI/CAM
PB
PB
ON OFF
Select [ON] to output the information displayed on the LCD monitor screen
together with the video as a video output signal.
Select [ON] to output the information displayed on the LCD monitor screen
together with the video as a video output signal.
DATE/TIME
SDI/CAM
PB
PB
Selects the date and time to display on the LCD monitor or overlay and output on
the video.
TIME: Displays/outputs the time.
DATE: Displays/outputs the date.
TIME & DATE: Displays/outputs the date and time.
OFF:
the video.
TIME: Displays/outputs the time.
DATE: Displays/outputs the date.
TIME & DATE: Displays/outputs the date and time.
OFF:
Does not display/output the date and time.
LEVEL METER
SDI/CAM
PB
PB
Sets whether to display the audio level meter.
ON OFF
ON OFF
ZOOM &
FOCUS
FOCUS
CAM
Sets whether to display the zoom value and focus value.
ON OFF
ON OFF
CARD &
BATTERY
BATTERY
SDI/CAM
PB
PB
Sets whether to display the remaining SD Memory Card capacity and the
remaining battery capacity.
ON OFF
remaining battery capacity.
ON OFF
OTHER
DISPLAY
DISPLAY
SDI/CAM
PB
PB
Sets the amount of information to display on the LCD monitor screen. (Page 78)
ON OFF
ON OFF
LCD
BACKLIGHT
BACKLIGHT
SDI/CAM
PB
PB
Adjusts the backlight of the LCD monitor. Set to [HIGH] for a brighter backlight.
LOW NORMAL HIGH
LOW NORMAL HIGH
LCD DTL
SDI/CAM
Emphasizes the edges of the video displayed on the LCD monitor screen.
ON OFF
ON OFF
LCD SET
SDI/CAM
PB
PB
Adjusts the LCD monitor. (Page 32)
LCD COLOR LEVEL: Adjusts the color density of the screen.
LCD BRIGHTNESS: Adjusts the brightness of the screen.
LCD CONTRAST:
LCD COLOR LEVEL: Adjusts the color density of the screen.
LCD BRIGHTNESS: Adjusts the brightness of the screen.
LCD CONTRAST:
Adjusts the contrast of the screen.
indicates the factory default setting.