Pelco C561M-F User Manual
C561M-F (8/06)
9
Specifications
ELECTRICAL
Input Voltage
Selectable 100, 120, 240 VAC, 50/60 Hz via the Primary Line Input connector strip
Output
Voltage/Power
Selectable 24 VAC (Tap A), 26 VAC (Tap B), or 28 VAC (Tap C) at 100 VA via the
Secondary Output Tap’s connector strip
Secondary Output Tap’s connector strip
Fusing
One fuse. Select from one of the following supplied fuses:
Three 1.6 A fast-acting fuses (120 VAC)
Three 500 mA fast-acting fuses (240 VAC)
Three 500 mA fast-acting fuses (240 VAC)
Spare Fuse
Holder
Holder
Two spare fuse holders (attached to transformer cover)
Required Input
Current
Current
1 amp
MECHANICAL
Contruction
Aluminum
Finish
Gray polyester powder coat
Cable Entry
Two hole plugs will accommodate 3/4-inch (1.91 cm) conduit fittings
(not provided) that meet NEMA Type 4X standards.
(not provided) that meet NEMA Type 4X standards.
Mount Method
Four 0.375-inch (0.95 cm) holes on mounting plate.
Latch
One stainless steel link-lock latch secured with screw; latch also can be secured
with padlock (not supplied)
with padlock (not supplied)
GENERAL
Environment
Indoor/outdoor
Operating Range
-50°F to 122°F (-45.56°C to 50°C)
Weight
6.84 lb (3.10 kg)
Dimension
See Figure 5
(Design and product specifications subject to change without notice.)