Rocketfish RF-GDS013 Leaflet

Congratulations on your purchase of another high-quality Rocketfi sh Gaming 
product. This starter kit can make your gaming more trouble-free and fun, and 
it can help your Nintendo® DSi™ game console last longer, too! All Rocketfi sh 
Gaming products are designed for years of trouble-free performance.

1  Connect the DC car adapter to your Nintendo 

DSi using the included USB cable. Make sure 
that both plugs are facing the correct direction 
before you insert them into the connectors, or 
you may damage the connector’s pins. 

Caution: Make sure that the plug is facing the correct 
direction before you connect it to your console, or you 
may damage the connector’s pins.

RF-GDS013

2  Insert the DC car adapter into a 

standard 12V DC car cigarette lighter 
or accessory socket. Make sure that 
the plug is fully inserted into the socket. 
The charge indicator LED on your 
console turns orange while recharging, 
then turns off  when fully charged. 

3   When your console is fully charged,

  unplug the car charger and disconnect 
  it from your game console. Make sure 
  that you pull on the  charger housing, 
  not the power cord itself. 

Shields provide a tough, durable, transparent surface, while keeping the LCD 
screens and camera lens clean and unscratched.

1  Clean the screens before installing 

the screen shields. 

2  Remove the adhesive backing from 

the screen shield and carefully 
attach it to the screen. 

3  Use any straight , rounded edge to 

smooth bubbles out of the shield 
from one side to the other.

4  Carefully attach the camera lens 

shield to the camera lenses on the 
interior and exterior of the DSi.

The play-thru case’s cover helps 
to protect your console from dirt, 
scratches, and damage from drops. 
It also allows complete access to all 
controls, the touch screen, and the 
stylus.

• 

Carefully slide your game console 
into the case.

With the earbud headphones, you can 
more easily hear game sounds, without 
disturbing others.

• 

Insert the earbud’s plug into the 
headphone connector on your 
console.

Warning: Make sure that the volume is turned
down before connecting the earbuds. 
Otherwise, you may damage your hearing.

Your new stylus, with an attached 
lanyard, is perfect for replacing the 
original stylus, if it gets lost or damaged. 
The lanyard makes it easy to remove 
and hold onto the stylus.

To attach a lanyard to a stylus:

1  Feed one end of the lanyard 

through the lanyard hole in the 
stylus.

2  Feed the other end of the lanyard 

through the lanyard loop that was 
fed through the hole, then pull to tighten.

Visit www.rocketfi shproducts.com.
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. ROCKETFISH is a trademark of Best Buy Enterprise Services, Inc. 
Registered in some countries. All other products and brand names are trademarks of their 
respective owners. 

ENGLISH 09-0118

DC car adapter (1)

Screen shields (2)

Camera lens shield (2)

Stylus (2)

Stylus lanyards (2)

Earbud headphones (1 set)

USB cable (1)

Clear play-thru case (1)

Quick Setup Guide (1)