Sennheiser EM 3731-II User Manual
Product overview
12
Command display (status display of the audio outputs AF and
Command)
Command)
The command display is only available with the EM 3732-II COM twin
receiver.
receiver.
Besides the two audio outputs
and
the EM 3732-II COM twin receiver
also features the two command outputs
.
Via the “
Command
” menu, you can configure the receiver so that – with
the command button of the transmitter pressed – the audio signal is
available at only one of the outputs or at both (see “Configuring the audio
outputs of the EM 3732-II COM” on page 34).
available at only one of the outputs or at both (see “Configuring the audio
outputs of the EM 3732-II COM” on page 34).
The command display
shows the audio output at which the
transmitter’s audio signal is available.
When “
AF
” lights up brightly, the audio signal is available at the audio
output
.
When “
AF
” does not appear, the audio signal is
not
issued on the audio
output
and/or
.
When “
COM
” lights up brightly, the audio signal is available at the
command output
When “
COM
” does not appear, the audio signal is
not
issued on the
command output
LEDs for booster supply of antenna inputs
The LEDs for booster supply of antenna input A
and/or B
light up
when:
•
the booster supply voltage is applied to the corresponding antenna
input A
input A
and/or B
The LEDs for booster supply of antenna input A
and/or B
go off
when:
•
the booster supply voltage for the corresponding antenna input A
and/or B
•
the booster supply voltage is short-circuited or overloaded.
COM
AF
J
K
L
M
AF
COM
N O P Q R S