D-Link DCS-940L User Manual

This is the domain name or IP address of your external e-mail server.

This  is  the  e-mail  address  of  the  person  sending  the  camera 

snapshots.

This is the e-mail address of the recipient. 

If  the  SMTP  server  uses  authentication,  you  must  enter  your  user 

name here.

This is the password that corresponds to your user name to connect 

to the SMTP server.

This section allows you to configure the email notification settings for your camera.

For example, if you want to use Gmail by SSL-TLS for the e-mail notification, you can follow the 

setup procedure as below:

Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.
Step 2 - Change the SMTP server port number from 25 to 465.
Step 3 - Enter your gmail E-mail address in Sender E-mail Address.
Step 4 - Enter the destination E-mail address in Receiver E-mail Address.
Step 5 - Enter the user name required to access the SMTP server.
Step 6 - Enter the password required to access the SMTP server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail will be sent to the e-mail account listed above.
 
Note: If you want to use the Yahoo SMTP server, the SMTP server address will be different between each registered region. And it only supports the SMTP 

server port number 465 for the SSL-TLS.