Leica 1000Z01 User Manual
© Leica
TPS-System 1000 Programs-2.3.1en
273
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
The most common method used is the "HORIZON-
TAL" method.
To select this method, move the cursor to "S. Offset Ht"
TAL" method.
To select this method, move the cursor to "S. Offset Ht"
and press
to display the three options.
Move the cursor to "HORIZONTAL" and press
.
This setting will remain as the current method until a
different method is chosen. Therefore it is not necessary
to go through the procedure every time.
different method is chosen. Therefore it is not necessary
to go through the procedure every time.
Accepts and stores parameters set. Continues to display
"POINT COORDS".
"POINT COORDS".
Stakeout and Record
point
point
The "POINT COORDS" dialog displays the current
chainage location of the offset point to be staked. The
display also shows the value for the prism pole (Refl.
Height) and the Easting and Northing coordinates of the
offset point and the finished grade elevation of the
actual point (not the offset location).
chainage location of the offset point to be staked. The
display also shows the value for the prism pole (Refl.
Height) and the Easting and Northing coordinates of the
offset point and the finished grade elevation of the
actual point (not the offset location).
ROAD+\ POINT COORDS
14:03
MC
Chainage
:
0.000
Refl.Height :
1.500
m
Easting
:
331.000
m
Northing
:
335.000
m
Elevation
:
31.000
m
STAKE EDIT
F1
F2
F3
F4
F5
F6
HELP
Activates the stakeout program