Toshiba 40TL900A User Manual

SETTING UP YOUR TV

21

The television can be tuned-in manually using ATV 

Manual Tuning. For example, you might use the 

you want to tune-in a station on another System.

Use 

C and c to move across the screen and select 

any of the ATV Manual Tuning options. Then use 

B 

or 

b to adjust the settings.

1 Position

The number to be pressed on the remote 
control to tune the channel.

2 System

Specifi c to certain areas.

3 Colour 

Factory set to Auto, should only be changed if 
problems are experienced, i.e. NTSC input from 
external source.

4 Skip

Set Skip to On (

8) or Off  (() for the selected 

channel. See page 22.

5 Signal 

The channel classifi cation.

6 Channel

The channel number on which a station is being 
broadcast.

7 Search

Search up and down for a signal.

8 Manual 

Only used if interference/weak signal is 
experienced. See page 73.

9 Station

Station identifi cation. Use the 

B b and C c 

buttons to enter up to seven characters.

To allocate a position on the television for a decoder 
and media recorder: turn the decoder on, insert a 
pre-recorded fi lm in the media recorder, press PLAY 
and manually tune.

a

 In 

the 

System Setup menu, press 

b to 

select ATV Manual Tuning and press OK.

b

 Use 

B or b to select the desired position. 

We suggest Pos. 0 for a media recorder.

Diff erent Channel numbers may be displayed.

c

 Press 

OK to select. If the channel chosen for 

the media recorder is set to skip, Skip should 
be removed before storing.

d

 Press 

c to select System and press B or b 

to change if required.

e

 Then 

press 

c to select Search.

f

 Press 

B or b to begin the search. The search 

symbol will fl ash.

g

 

Each signal will show on the television. If it is 
not your media recorder, press 

B or b again 

to restart the search.

h

 

When your media recorder signal is found, 
press 

c to move along to Station. Use B, b, 

C and c to put in the required characters, 
e.g. VCR.