Panasonic TH-L37X15M User Manual

VIERA

 Link “HDA

VI Control

TM

”

33

This function may not work properly depending on the connected equipment.

For DIGA Recorder / DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera with VIERA 

function, connect to HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable.

For Player theatre / Blu-ray Disc theatre / Amplifier, connect to HDMI1, HDMI2 or HDMI3 terminal via an HDMI 

cable and/or RCA cable for audio output from the TV.

Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized. 

Recommended Panasonic’s HDMI cable part number:

• RP-CDHG10 (1.0 m) • RP-CDHG15 (1.5 m) • RP-CDHG20 (2.0 m) • RP-CDHG30 (3.0 m) • RP-CDHG50 (5.0 m) 

●

●
●
●

Connect the equipment supporting VIERA Link.

Set up the connected equipment. Read the manual of the equipment.

For optimal recording, the settings of the recorder might be required. For details, read the manual of the 

recorder.

Set VIERA Link On in Setup Menu   “VIERA Link” (p. 21)

Set up the TV   After connection, turn the equipment on and then switch the TV on. Select the input 

This setup should be done each time when the following conditions occur:

• for the first time / • when adding or reconnecting equipment / • when changing setup

●

●

●
●

●

Channel setting can be downloaded to the recorder.

Automatic input switching - When the connected equipment is operated, input mode is switched 

automatically.

Set Power on Link “On” in Setup Menu to use this function   “Power on Link” (p. 21)

When the connected equipment starts playback or direct navigator / function menu for the equipment 

are activated, the TV is automatically turned on. (Only when the TV is in Standby mode.)

Set Power off Link “On” in Setup Menu to use this function   “Power off Link” (p. 21)

When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.

This function will work even if the TV enters standby mode automatically by Off Timer function or auto power 

standby function.

●

Set Standby Power Save “On” in the Setup Menu to use this function   “Standby Power Save” (p. 21)

The power consumption in Standby mode of the connected equipment is controlled higher or lower in 

synchronization with the TV On / Off state to reduce the consumption.

When the TV is set to Standby mode, the connected equipment is automatically set to Standby and 

the power consumption in Standby mode of the connected equipment is automatically minimized.

When the TV is turned on, the connected equipment is still in Standby mode, but the power 

consumption is increased to make startup time early.

This function is effective if the connected equipment can change the power consumption in Standby mode 

and is set to higher consumption.

●

use this function   “Intelligent Auto Standby” (p. 21)

When the TV is on, the connected equipments not in use go into Standby mode automatically to 

reduce the power consumption.

If you select “On (With reminder)”, the on screen message will be displayed to be noticed before working this 

function.

●

th_l32_37x15k_m_r_x_Eng_4gc0238_33   33

th_l32_37x15k_m_r_x_Eng_4gc0238_33   33

2009/04/08   14:37:00

2009/04/08   14:37:00