Graco 3A1214B User Manual

NOTE: Never transport the RoadLazer while the paint 
gun ball valves are open, the system is under pressure, 
and the engine is running, as this could cause damage 
to components.

1.

Unlock gun arm red-handled clamp on slide beam.

2.

Lift gun arm up from ground, and push in to center 
of RoadLazer.

3.

Pull gun arm hitch pin out of frame.

4.

Put gun arm hitch pin back in frame and secure with 
clip.

5.

Unlock two red-handled clamps and center the slide 
beam on the vehicle.

6.

Lock three red-handle clamps to secure the slide 
beam and gun arm.

ti16425a

ti16422a

ti15837a

ti16923a

ti16915a

ti15954a