Graco 3A1214B User Manual

If the battery is newly purchased or has not been used 
for a long time, charge it before you use it. 

Load RoadPak into vehicle using a forklift or a hoist that 
is rated for the weight capacity of the RoadPak. For 
RoadPak weight information see Technical Data, page 
27.

The RoadPak can be mounted in the front or rear of the 
vehicle bed as well as in any orientation desired. The 
base of the RoadPak is 39.5 in. x 49.5 in. (1.0m x 
1.25m).

After mounting the RoadPak on the vehicle, firmly 
secure the RoadPak to the vehicle using the tie-down 
brackets at all four corners, or by bolting the RoadPak 
through the bed of the truck to the frame in all four loca-
tions.

RoadLazer needs to be properly secured to prevent it 
from moving during transportation and operation.

Paint drums are heavy and could shift from side to side 
when the vehicle is cornering. The paint drums could 
fall from the vehicle and cause injury or death. Secure 
the drums when the vehicle is in transport or spraying.

Paint could splash from the paint drum bung adapters 
when the paint drums are full and the vehicle is mov-
ing. Do not overfill the paint drums.

ti16442a

ti16665a

ti16653a

ti16654a

ti16664a

ti16599a

ti16443a