Combi 8100 User Manual

1. Buckle shoulder harness straps and chest clip.

2. From front of car seat, loosen shoulder 

harness straps by pressing harness adjuster 
lever and pulling harness straps out to 
lengthen them. 

- Make sure both buckle tongues are 

buckled and chest clip is closed.

3. From back of car seat, remove both 

metal harness strap clips from adjuster 
loop (fig. f).

4. From front of car seat, pull shoulder

harness straps through car seat shell,
seat pad and infant insert pad (fig. g).

1. From front of car seat, rethread shoulder 

harness straps through desired shoulder
harness strap slots of infant insert, seat 
pad and seat back. Make sure shoulder 
harness straps are not  twisted and are 
threaded through matching slot of seat 
pad and seat back. 

NOTE: Only use two lowest sets of shoulder 

harness slots with infant insert.

2. From back of car seat make sure shoulder

straps are not twisted, pull shoulder
harness straps down and re-attach 
harness strap metal clips to adjuster 
loop as shown in fig. h. 

NOTE: Openings in both metal

clips MUST be toward
center of car seat.