Sterling Plumbing scc2 User Manual

2–Pump 20-Station Controllers 

Installation 

21 of 51 

value.  The keypad disappears, and the “Station Copy” screen shows the station 
number you entered under Last Station. 

5.  Touch the green Copy to Range of Stations button.  Complete briefly appears 

on the screen. 

6.  As appropriate, either continue copying to other stations, or touch Return to go back 

to the “Station Setup” screen. 

Copying to All Other Stations: 

1.  On the “Station Copy” screen (Figure 9), touch the green Copy to All Stations 

button.  Complete briefly appears on the screen. 

2.  Touch Return to go back to the “Station Setup” screen. 

Setting Up Pumps 
Before starting the system, you must define several settings for each pump, such as how 
quickly to shut it down when it is not in use. This section first discusses how to use the 
controller’s menu system to configure pumps. The table on page 422 discusses the individual 
choices.   

1. 

Go to the “Pump Status“ screen if needed. To reach this screen from any other screen, 
touch Menu on the right-hand side of the screen, and then touch Pumps. The “Pump 
Status” screen appears: 

Stations

19-20

 

 

 

Stations

19-20

 

 

2. 

Touch the icon for the pump you want to set up, and hold it for several seconds. The 
“Pump Setup” screen opens.