GTO R4854 01 User Manual

  GTO 4000XLS Instruction Manual © 01.10.12

The Stall Force potentiometer on the 

control board controls the obstruction 

sensitivity (or the amount of force the 

operator will apply to an obstruction for 

two (2) seconds before it automatically 

stops and reverses direction).
IMPORTANT:  For safety reasons 

application. 
The Stall Force potentiometer on the 

control board operates like a volume 

control on a radio. Use a small flat blade

screwdriver to adjust the potentiometer. 

Adjust the stall force from the MIN 

position until the gate operates 

smoothly without obstructing from its 

own weight or wind conditions.
NOTE: you may need to increase the 

stall force in cold temperatures due to 

increased resistance from gate hinges.

The Auto-Close Time potentiometer controls the Auto-Close feature, and determines how long the gate 

will remain open (at the fully open position) before it begins to close. The settings for this feature are OFF, 

or from 3 to 120 seconds. 
Adjust the Auto-Close potentiometer by using a small flat blade screwdriver.