AT&T ISB7005 User Manual

12

1. Connect the 12 VDC Power Supply 

plug on the access point to the wall 
power outlet. Use only the power 
adapter provided with the product.

2. Connect the power plug to the power 

receptacle on the wireless access point.

3. Connect one end of the RJ-45 

Ethernet cable to the Ethernet port on 
the wireless access point.

4. Connect the other end of the RJ-45 

Ethernet cable to an available Ethernet 
port on your wireless gateway.

T14853

T14854

12VDC

Reset

Ethernet

1 

 Wireless 

LED

2 

 

Wi-Fi Protected Setup (WPS) button

 

3 

 

Wi-Fi Protected Setup (WPS) LED

 

4 

 Ethernet 

LED

5 

 Power 

LED

 

 

Note: This illustration may vary from the actual product.

1  Ethernet Port 

Connects the Wireless Access Point to a  

  

wireless 

gateway

2  Reset 

Restores factory default settings when held 

 

 

for more than 5 seconds

3  Power 

Connects device to the external 12 VDC  

  

power 

supply

Note: This illustration may vary from the actual product.

T14961

12VDC

Reset

12VDC

Reset

Ethernet

1. Press the OK button on the receiver.

2. Press the WPS button on the wireless access point.