AT&T ISB7005 User Manual

9

Connect to TV. You must set the channel on your TV to the channel 

 

   

designated by your service provider (usually channel 3). Contact your 

 

   

service provider for the channel information

  2 Network 

Connect to the Ethernet (CAT-5) network at your home, if applicable

Connect the receiver to the component video input (YPbPr) on the  

 

  

 

HDTV. See pages 13 and 14 for more information

Connect an S-Video cable to send an S-Video signal to your TV, VCR, or 

 

   

DVD recorder. This signal is standard-defi nition but higher quality than 

  

 

other 

standard-defi nition TV connections. See page 14 for more 

  

 

information

Connect to composite input on your HDTV or SDTV 

Two video output connectors are provided. Typically, one output 

 

   

is connected to the TV, and the other output is used to connect to a 

 

   

home theater system, DVD recorder, or VCR 

 

Connect RCA-type cables to Audio Out to send analog audio signals    

   

(left and right) to a TV with stereo inputs or to a stereo amplifi er

 

   

Note: Two sets of audio out connectors are provided. Typically, one set 

 

   

of outputs is connected to the TV, and the other set is used to connect 

 

   

to a home theater system, DVD recorder, or VCR

Connect an optical cable to send a digital audio signal to a surround-   

 

   

sound receiver or other digital audio device

Connect an HDTV HDMI

™

 (High-Defi nition Multimedia Interface) cable    

 

   

from the HDTV to the HDMI port. HDMI supports both digital audio and   

  

 

video. 

See page 13 for more information

USB connector. (Reserved for future use)

  10  Power 

Connect the DC output of the AC power adapter (provided) to deliver    

 

   

power to the receiver

Note: This illustration may vary from the actual product.

T14821

T14821