D-Link DFL-200 User Manual
70
Status
In this section, the DFL-200 displays the status information about the Firewall.
Administrator may use Status to check the System Status, Interface statistics, VPN,
connections and DHCP Servers.
System
Click on Status in the menu bar, and then click System below it. A window will appear
providing some information about the DFL-200.
Uptime – The time
the firewall have been
running, since the last
reboot or start.
running, since the last
reboot or start.
CPU Load –
Percentage of cpu used.
Connections –
Number of current
connections trough the
firewall.
connections trough the
firewall.
Firmware version –
The firmware version
running on the firewall.
running on the firewall.
Last restart – The
reason for the last
restart.
restart.
IDS Signatures –
The IDS signature
versions.
versions.
There are also two
graphs on this page,
one showing the CPU
usage during the last 24
hours. The other one is
showing the state table usage during the last 24 hours.
one showing the CPU
usage during the last 24
hours. The other one is
showing the state table usage during the last 24 hours.