Monster Cable HTPS 7000MKII User Manual
23
TROUBLESHOOTING
Symptom
Possible Cause
Remedy
The Unswitched LED
on front panel is Off.
on front panel is Off.
The PowerSource is not plugged in.
• Plug the PowerSource into a properly
grounded 120 volts (nominal) outlet
and make sure it is on.
and make sure it is on.
The PowerSource is plugged in,
but the outlet is not receiving power.
but the outlet is not receiving power.
The Switched LED is Off.
You are using the Switched Outlet
Remote Turn-On feature and haven’t
plugged the plug into the component
you wish to use to activate the
Remote Turn-On.
Remote Turn-On feature and haven’t
plugged the plug into the component
you wish to use to activate the
Remote Turn-On.
• Plug the plug into the component
you wish to use to activate
the Remote Turn-On.
the Remote Turn-On.
The component remote control
you are using to power the Remote
turn-on has a dead battery.
you are using to power the Remote
turn-on has a dead battery.
• Replace the battery powering
the component remote control.
• Plug the component into a properly
grounded 120 volt (nominal) outlet.
The component you wish to use
to activate the Remote Turn-On
isn’t plugged into a properly grounded
120 volt (nominal) outlet.
to activate the Remote Turn-On
isn’t plugged into a properly grounded
120 volt (nominal) outlet.
• Plug the PowerSource into a properly
grounded 120 volts (nominal) outlet.