Husqvarna K750 User Manual

 

English

 

 – 

 

7

 

positions

 

. This is controlled by two independent return spring 

systems. This means that the throttle trigger is automatically 
locked in the idle position.

 

This guard is fi

 

tted above the cutting blade and is designed to 

prevent parts of the blade or cutting fragments from being 
thrown towards the user.

 

′

Regularly check the vibration damping units for cracks or 
deformation.

Make sure the vibration damping units are securely attached 
to the engine unit and handle unit.

Keep the handles clean and dry.

Start the engine and make sure the engine stops when you 
move the stop switch to the stop setting.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the 
machine.

•

Make sure the throttle control is locked at the idle setting 
when the throttle lockout is released.

•

Press the throttle lockout and make sure it returns to its 
original position when you release it.

•

Check that the throttle control and throttle lockout move 
freely and that the return springs work properly.

•

Start the power cutter and apply full throttle. Release the 
throttle control and check that the cutting blade stops and 
remains stationary. If the cutting blade rotates when the 
throttle is in the idle position you should check the 
carburettor’s idle adjustment.

•

 See instructions under the heading Maintenance.

′s safety