Genie Z-45/25J User Manual

22

Genie Z-45/25 & Genie Z-45/25J

Part No. 52421

Operator's Manual

First Edition · Seventh Printing

FUNCTION TESTS

62 Shut the engine off.

63 Pull out the red Emergency Stop button to

the on position.

64 Move the lift/drive select switch to the lift

position (if equipped).

65 Press down the foot switch.

66 Simultaneously hold

the auxiliary power
switch on and
activate each
function control
handle or toggle
switch.

Note: To conserve battery power, test each
function through a partial cycle.

Result: All boom and steer functions should

operate. Drive functions should not operate with
auxiliary power.

67 Move the lift/drive select switch to the lift

position.

68 Press down the foot switch.

69 Move the drive control handle off center.

Result: No drive functions should operate.

70 Activate each boom function toggle switch.

Result: All boom functions should operate.

71 Move the lift/drive select switch to the drive

position.

72 Press down the foot switch.

73 Activate each boom function toggle switch.

Result: No boom functions should operate.

74 Move the drive control handle off center.

Result: The drive functions should operate.

75 Repair any malfunctions before operating the

machine.

76 Press down the foot switch.

77 Move the drive control handle off center and

activate a boom function toggle switch.

Result: No boom functions should operate. The

machine will move in the direction indicated on
the control panel.

78 Repair any malfunctions before operating the

machine.