Insignia NS-40D420MX16 Leaflet

Your TV has four VESA mounting holes on the back. If you attach a wall-mount 
bracket to the back of your TV, the bracket must be securely attached, using 
all four holes. If you do not use all four mounting holes, your TV may fall and 
cause property damage or personal injury. See the documentation that came with 
your wall mount for complete mounting instructions.

Quick Setup Guide

  |  

NS-40D420NA16/NS-40D420MX16

How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game console?

How do I attach the stand to my TV? (not for wall mounting)

You’ll need: Soft surface and Phillips screwdriver

FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then click 

Support & Service. 
Enter NS-40D420NA16

in the box under 

Manual, Firmware, Drivers & Product 
Information, then click 

►

. The 

NS-40D420MX16 comes with a printed 
manual.

STOP
Do not plug your power cord in until all 
other devices have been connected. 

How do I prepare my TV for wall mounting? (not for use with a TV stand)

You’ll need: Soft surface and Phillips screwdriver

C   Align the screw holes on the stand column 

with the holes on the back of your TV, then 
secure the column to your TV with the four 
provided M5 × 12 mm screws (the short 
screws).

B   Carefully place your TV face-down on a 

cushioned, clean surface.

  

A   Align the stand column with the stand 

base, then secure the column to the base 
with the four provided (ST4 × 16 mm) 
screws (the long screws). 

Before using your new product, please read these 

instructions to prevent any damage.

ST4 x 16 mm screws 

M5 x 12 mm screws

 

DIGITAL

 

ANT/CABLE

         IN  

COMPONENT IN

(OPTICAL)

VIDEO / Y           P

B

               P

R

L

R

AUDIO

-

-

AV IN

OUTPUT

Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack. 
However, certain devices must be connected to the ARC jack. See the instructions that came 
with your device for more information.

Note: Connect the yellow 

video cable to the 

green VIDEO/Y jack.

Best video quality

Note: The component and AV jacks are shared. This means you can connect 
only one component or AV device at a time.  We suggest upgrading to HDMI

 

(

)

 if your device supports it. 

M6 x 30 mm screws

Remote control and 
two AAA batteries

Stand column

Stand base

ST4 screws (16 mm length) (4 pcs.)

M5 screws (12 mm length) (4 pcs.)

Power cord

Power indicator

Remote control sensor

M6 screws (30 mm length) (4 pcs.)
 

 
Spacers(4 pcs.)

A   Carefully place your TV face-down on a cushioned, clean surface.

B 

Insert four spacers (provided) into the mount screw holes on the back of your TV, then attach the 

wall-mount bracket to your TV using either the four M6 × 30 mm screws (provided) or the screws that 

came with the wall-mount bracket. See instructions that came with the wall-mount bracket

 

for 

 

information about which screws to use and how to correctly hang your TV. 

 

Warning: This apparatus is intended to be supported by a UL Listed wall-mount bracket.

C   See the instructions that came with your wall mount for more information about how to correctly mount 

your TV.