Alvin CE101 Leaflet

Key Qty.

Description

A

2

Sets of Hinged Legs

B

2

Leg Cross Bars

C

2

Plastic Storage Trays

D

1

Green Chalkboard

E

1

White Dry Erase Board

F

1 

Paper Roll Holder

G

4

2" Bolts

H

8

1

1

⁄

2

" Bolts

I

16

Plastic Bolt Caps

J

2

Jumbo Paper Clips

K

4

1

1

⁄

4

" Bolts

Bloomfield, CT     Grand Prairie, TX   

www.alvinco.com

1. Before assembly, check to see that you 

have all parts shown on list.

2. Lay one of the hinged legs sets (A) 

on the floor with the hinges facing up.

3. Open the legs and lay one of the leg 

cross bars (B) with the notched side 
facing you and the opening of the notch 
pointing towards the hinges.

4. Align the holes  and insert a 2" bolt (G).

Fasten with plastic bolt cap (I). Bolt 
cap should be on the opposite side of leg 
from the hinge.

5. Repeat for other set of legs.

6. Position both sets of legs in the upright 

position with hinges facing one another.

7. Based on the height of the children to be 

using the easel, determine whether the 
upper set or the lower set of holes will be 
used to mount the 2 boards.

8. Attach the green chalkboard (D) to one 

side of the legs using 4 of the 1

1

⁄

2

" bolts 

(H) and bolt caps (I).

9. Align one of the plastic storage trays (C) with the set of 

holes just below the chalkboard (D) and attach to legs 
using 1

1

⁄

4

" bolts (Part K) and caps (I).

10. Repeat steps 8 and 9 to attach the white board (E) and 

storage tray (C) on the opposite side.

11. Place the paper roll holder (F) into the notches in each 

of the leg cross bars (B).

Made in China

Nov  2004