Philips WACS700 User Manual
Express Installation
6
To apply new settings on WACS700, you need to
let both Center and Station enter Installation
Mode.
let both Center and Station enter Installation
Mode.
On Center:
a
. Select HD.
b.
Press MENU
c.
Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
enter Station Mgnt menu
d.
In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select Add New
Station
controls 3 or 4 and 2 to select Add New
Station
e.
Press STOPÇ to exit Installation Mode
when Center has found all the stations
when Center has found all the stations
On Station:
a
. Select AUX.
b.
Press MENU.
c.
Use the navigation controls 3 or 4 and 2 to
select Installation Mode
select Installation Mode
7
Click Next to start DMM installation.
➜
The icon
appears on your computer
desktop after DMM installation is finished.
8
Disconnect the supplied Ethernet cable from your
PC and Center., and then, connect your PC to the
wireless router/access point.
PC and Center., and then, connect your PC to the
wireless router/access point.
Option 3:
Wired connection
Choose this option if you want to
connect Music Center to an exist-
ing wired network with wired
router
connect Music Center to an exist-
ing wired network with wired
router
1
Check the wired router is working properly and
enable its DHCP.
enable its DHCP.
2
In Software Installation page, click to select
Music Center connect to Wired Network
Music Center connect to Wired Network
3
When prompted by the installation wizard, ensure
the supplied Ethernet cable (straight cable) is con-
nected to Center’s ETHERNET port.
the supplied Ethernet cable (straight cable) is con-
nected to Center’s ETHERNET port.
4
When the screen on the right appears, select
“Obtain an IP address automatically” .
“Obtain an IP address automatically” .
5
Follow the screen instructions to finish the PC
connection.
connection.
➜
The screen shows: “......The connection to your
Music Center has been established......”
6
To apply new settings, you need to power off
WAC700 Center, and then power it on again.
WAC700 Center, and then power it on again.
7
Click Next to start DMM installation.
➜
The icon
appears on your computer
desktop after DMM installation is finished.
8
Disconnect the supplied Ethernet cable from your
PC and Center., and then, connect your PC and
Center to the wired router.
PC and Center., and then, connect your PC and
Center to the wired router.
Notes:
– If you are Windows 98 SE/ME user, you will be prompted to restart your computer before
– If you are Windows 98 SE/ME user, you will be prompted to restart your computer before
starting DMM installation.
– If you are Windows 2000 user, check Service Pack
2 is installed.
– Select PC’s network adapter that connects Center
via the supplied Ethernet cable, if you have installed
more than one network adapter on your PC
more than one network adapter on your PC
– In Option 3:Wired connection, avoid assigning the
IP address manually as: IP address: 169.254.xxx. yyy; Subnet mask: 255.255.0.0. Such an IP
address will cause conflict with the WiFi network of WACS700 Center and Station, resulting in
Center’s disabled Ethernet port.To restore the disabled Ethernet port, restore your WAC700
Center to its factory settings (see Chapter Reset in the User Manual)
address will cause conflict with the WiFi network of WACS700 Center and Station, resulting in
Center’s disabled Ethernet port.To restore the disabled Ethernet port, restore your WAC700
Center to its factory settings (see Chapter Reset in the User Manual)
Express Installation
Connect to PC-Eng 2005.6.29 10:39 Page 3