Epson 72 User Manual
50
Caring for Your Epson MovieMate
6. Gently insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
7. To replace the lamp cover, insert the tabs and then snap the cover into place. (MovieMate
won’t work if the lamp cover is loose.)
8. After replacing the lamp, you need to reset the lamp timer, as described in the next
section.
Resetting the Lamp Timer
1. Connect the power cable and press the
button to turn MovieMate on.
2. Press
on the remote control. You see the Visual Setup menu.
3. Press
to highlight
Info
, then press
to select it.
4. Press
again. You see the following on the screen:
5. Select
Yes
and press
to reset the timer.
The lamp usage timer displays
0 H
(zero hours) until you’ve used the lamp for at least
10 hours.