InStep 11-KS187 User Manual

Parts List:

Description

Qty.

Frame assembly with seat,

canopy, and wrist strap

rame assembly with seat,

Front Wheel

Parent Console

(not on all models)

Under-seat Basket

(not on all models)

Rear Wheels

Front Fender

#8 – 11.2" Phillips head screws

Tools Required:

Phillips screw driver, adjustable wrench.

Stroller Assembly Instructions
Unfold Stroller: Remove from carton and remove any packaging materials that

may be holding the frame in closed position. Grasp frame handle and open.

Unfold Stroller: Remove from carton and remove any packaging materials that

Lock both plastic latches, on sides, onto the lower frame, insert locking pin into

may be holding the frame in closed position. Grasp frame handle and open.

hole in latch and frame, lock the pin in place by slipping the wire loop over

Lock both plastic latches, on sides, onto the lower frame, insert locking pin into

the end of the lock pin. {see Figure 1.A}

hole in latch and frame, lock the pin in place by slipping the wire loop over

Rear Wheel Assembly
Grasp rear wheel in one hand, slide wheel’s axle into hole in rear of frame.

Push up on the axle release lever so that the wheel is fully inserted. Pull the

Grasp rear wheel in on

wheel ﬁ rmly, the wheel should not come off if fully inserted/locked. Repeat for

Push up on the axle release lever so that the wheel is fully inserted. Pull the

other side. To release wheel push up on axle release lever and pull off wheel.

wheel ﬁ rmly, the wheel should not come off if fully inserted/locked. Repeat for

Front Wheel Assembly
Tip stroller back so that the handlebar is down on the ground and the front fork

is up. Attach the front wheel by loosening the wheel’s Quick Release (Q/R) lever

Tip stroller back so that the handlebar is down on the ground and the front fork

on the front wheel far enough to allow the axle to slide into the front fork. With

is up. Attach the front wheel by loosening the wheel’s Quick Release (Q/R) lever

wheel’s Q/R lever in open position, hand tighten the cone nut until almost tight,

then ﬂ ip wheel’s Q/R lever backward to the closed position to lock wheel in

wheel’s Q/R lever in open position, hand tighten the cone nut until almost tight,

place. Note this step may require minor adjustment until the Q/R lever ﬂ ips back

then ﬂ ip wheel’s Q/R lever backward to the closed position to lock wheel in

with ﬁ rm pressure. Pull outward on wheel to ensure it is locked in place.

place. Note this step may require minor adjustment until the Q/R lever ﬂ ips back

Caution:

The interior jam nuts are factory installed and do not need adjustment.

Close the front caliper brake by lowering the Q/R lever. Spin the front wheel

to make sure the brake pads do not rub and are properly aligned to the rim. If

Close the front caliper brake by lowering the Q/R lever. Spin the front wheel

brake pad alignment is off, loosen brake pad nut with an adjustable wrench,

to make sure the brake pads do not rub and are properly aligned to the rim. If

align brake pad and retighten nut while holding brake pad in place.

Caution:

Always be sure to reengage the brake by rotating the Q/R lever for-

ward (toward the front wheel) before using the stroller.

Always be sure to reengage the brake by rotating the Q/R lever for-

IMPORTANT
If you notice that the stroller steers to one direction you may need to adjust the

front wheel to align it. To do so loosen the front axle Q/R lever, points the front

If you notice that the stroller steers to one direction you may need to adjust the

wheel in the opposite direction the stroller is veering, and retighten the Q/R lever.

If you need help making this adjustment, please call our Customer Service

wheel in the opposite direction the stroller is veering, and retighten the Q/R lever.

department for assistance.

If you need help making this adjustment, please call our Customer Service

Rear Wheel Assembly - {Figure 1.b}

Front Wheel Assembly

Operating Instructions

Run Around

™

& Run Around

™

LTD 11-KS107, 11-KS186, 11-KS187...page 2