Renesas R5S72623 User Manual

Page of 2152
 
Section 18   Serial Sound Interface 
 
R01UH0134EJ0400  Rev. 4.00  
 
Page 919 of 2108 
Sep 24, 2014 
 
 
 
SH7262 Group, SH7264 Group 
18.4.2
 
Non-Compressed Modes 
The non-compressed modes support all serial audio streams split into channels. It supports I
2
compatible format as well as many more variants on these modes. 
(1)   Slave Receiver 
This mode allows the module to receive serial data from another device. The clock and word 
select signal used for the serial data stream is also supplied from an external device. If these 
signals do not conform to the format specified in the configuration fields of this module, operation 
is not guaranteed. 
(2)  Slave Transmitter 
This mode allows the module to transmit serial data to another device. The clock and word select 
signal used for the serial data stream is also supplied from an external device. If these signals do 
not conform to the format specified in the configuration fields of this module, operation is not 
guaranteed. 
(3)  Slave Transceiver 
This mode allows serial data transmission and reception between this module and another device. 
The clock and word select signal used for the serial data stream is also supplied from an external 
device. If these signals do not conform to the format specified in the configuration fields of this 
module, operation is not guaranteed. 
(4)  Master Receiver 
This mode allows the module to receive serial data from another device. The clock and word 
select signals are internally derived from the oversampling clock. The format of these signals is 
defined in the configuration fields of this module. If the incoming data does not follow the 
configured format, operation is not guaranteed. 
(5)  Master Transmitter 
This mode allows the module to transmit serial data to another device. The clock and word select 
signals are internally derived from the oversampling clock. The format of these signals is defined 
in the configuration fields of this module.