Renesas R5S72621 User Manual
Section 11 Multi-Function Timer Pulse Unit 2
Page 536 of 2108
R01UH0134EJ0400 Rev. 4.00
Sep
24,
2014
SH7262 Group, SH7264 Group
11.4.7
Reset-Synchronized PWM Mode
In the reset-synchronized PWM mode, three-phase output of positive and negative PWM
waveforms that share a common wave transition point can be obtained by combining channels 3
and 4.
waveforms that share a common wave transition point can be obtained by combining channels 3
and 4.
When set for reset-synchronized PWM mode, the TIOC3B, TIOC3D, TIOC4A, TIOC4C,
TIOC4B, and TIOC4D pins function as PWM output pins and TCNT3 functions as an upcounter.
TIOC4B, and TIOC4D pins function as PWM output pins and TCNT3 functions as an upcounter.
Table 11.50 shows the PWM output pins used. Table 11.51 shows the settings of the registers.
Table 11.50 Output Pins for Reset-Synchronized PWM Mode
Channel Output
Pin Description
3
TIOC3B
PWM output pin 1
TIOC3D
PWM output pin 1' (negative-phase waveform of PWM output 1)
4
TIOC4A
PWM output pin 2
TIOC4C
PWM output pin 2' (negative-phase waveform of PWM output 2)
TIOC4B
PWM output pin 3
TIOC4D
PWM output pin 3' (negative-phase waveform of PWM output 3)
Table 11.51 Register Settings for Reset-Synchronized PWM Mode
Register Description
of
Setting
TCNT_3
Initial setting of H'0000
TCNT_4
Initial setting of H'0000
TGRA_3
Set count cycle for TCNT_3
TGRB_3
Sets the turning point for PWM waveform output by the TIOC3B and TIOC3D pins
TGRA_4
Sets the turning point for PWM waveform output by the TIOC4A and TIOC4C pins
TGRB_4
Sets the turning point for PWM waveform output by the TIOC4B and TIOC4D pins