A&D GP-102K User Manual

 

 70

The procedure below describes an easy way to recall the tare value to be used for weighing. When 

the recalled tare value is to be changed, refer to “Storing the tare value”. 

1  Set the “Data memory (data)” parameter to “5”. 

2  Press the MODE key to enter the tare value recalling 

mode. The tare value last selected with its tare 
number appears. The display is as shown to the right, 
with all the digits blinking.   

3  Press the MODE key to select the value. Each time 

the MODE key is pressed, the displayed value 
changes as follows: t03 

→ t04 → t05 → .... → t20 → 

t01

→. 

4  Press the PRINT key to confirm the selection. The 

balance returns to the weighing mode with the 
selected tare value ready for use. 

  To cancel the selection, press the CAL key. The 

balance returns to the weighing mode. 

 

Cancel the tare value data as follows. 

1  Remove everything from the weighing pan and press 

the RE-ZERO key to cancel the tare value.