Renesas R5S72643 User Manual
Section 25 NAND Flash Memory Controller
Page 1298 of 2108
R01UH0134EJ0400 Rev. 4.00
Sep
24,
2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W
Value R/W
Description
25
CDSRC
0
R/W
Data Buffer Specification
Specifies the data buffer to be read from or written to in
the data stage in command access mode.
the data stage in command access mode.
0: Specifies FLDATAR as the data buffer.
1: Specifies FLDTFIFO as the data buffer.
24
DOSR
0
R/W
Status Read Check
Specifies whether or not the status read is performed
after the second command has been issued in
command access mode.
after the second command has been issued in
command access mode.
0: Performs no status read
1: Performs status read
23, 22
All
0
R
Reserved
These bits are always read as 0. The write value should
always be 0.
always be 0.
21 SELRW
0
R/W
Data
Read/Write Specification
Specifies the direction of read or write in data stage.
0: Read
1: Write
20 DOADR
0
R/W
Address
Stage Execution Specification
Specifies whether or not the address stage is executed
in command access mode.
in command access mode.
0: Performs no address stage
1: Performs address stage
19, 18
ADRCNT
[1:0]
[1:0]
00
R/W
Address Issue Byte Count Specification [1:0]
Specify the number of bytes for the address data to be
issued in address stage.
issued in address stage.
00: Issue 1-byte address
01: Issue 2-byte address
10: Issue 3-byte address
11: Issue 4-byte address