Renesas R5S72646 User Manual
Section 24 A/D Converter
R01UH0134EJ0400 Rev. 4.00
Page 1279 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
24.4.6
External Trigger Input Timing
A/D conversion can also be externally triggered. When the TRGS[3:0] bits in ADCSR are set to
B'1001, an external trigger is input to the
B'1001, an external trigger is input to the
ADTRG pin. The ADST bit in ADCSR is set to 1 at the
falling edge of the
ADTRG pin, thus starting A/D conversion. Other operations, regardless of the
operating mode, are the same as when the ADST bit has been set to 1 by software. Figure 24.6
shows the timing.
shows the timing.
B
φ
ADST
A/D conversion
ADTRG
Internal trigger
signal
Figure 24.6 External Trigger Input Timing