A&D GP-100KS User Manual

 

 16

The units or modes can be selected and stored in the function table. The sequence of displaying the 
units or modes can be arranged so as to fit the frequency of use in the function table.

   

 

Select a unit or mode and arrange the sequence of display as follows: 

1  Press and hold the SAMPLE key until ba5fnc of the 

function table is displayed, then release the key. 

2 Press the SAMPLE key several times to display  

Unit . 

3  Press the PRINT key to enter the unit selection mode. 

4  Specify a unit or mode in the order to be displayed 

using the following keys. 

SAMPLE key 

To sequentially display the units. 

RE-ZERO key 

To  specify a unit or mode. The 
stabilization indicator appears when 
the displayed unit or mode is 
specified. 

5  Press the PRINT key to store the units or modes. 

The balance displays  end  and then displays the 
next menu item of the function table. 

6  Press the CAL key to exit the function table. Then the 

balance returns to the weighing mode with the 
selected unit.