A&D GP-100KS User Manual

 

 42

The parameter setting of “Data output mode (prt)” applies to the performance when the “Data 
memory (data)” parameter is set to “2” (to store the weighing data) and when the data is transmitted 
using the RS-232C interface. 

 

When the PRINT key is pressed with the stabilization indictor turned on, the balance outputs or 
stores the weighing data and the display blinks one time. 

Required setting 

dout

 

prt 0 Key 

mode 

 

When the displayed value is stable and the conditions of “Auto print polarity”, “Auto print difference” 
and reference value are met, the balance outputs or stores the weighing data.   
When the PRINT key is pressed with the stabilization indictor turned on, the balance outputs or 
stores the data and the display blinks one time. 

Mode A:  Required setting 

dout prt 

1 

Auto print mode A (reference = zero) 

 

dout ap-p 

Auto print polarity 

 

dout ap-b 

Auto print difference 

Example 

“For weighing each time a sample is placed and removed,       
with “ar-d” set to “1” (to adjust zero after the data is output).”

 

 

Mode B:  Required setting 

dout prt 

2 

Auto print mode B (reference = 

  

 

 

 

  last 

stable 

value) 

 

dout ap-p 

Auto print polarity 

 

dout ap-b 

Auto print difference 

Example 

“For weighing while a sample is added.” 

 

The balance outputs the weighing data continuously regardless of the display condition. The display 
does not blink in this mode. This mode is not available and the interval memory mode is used when 
the “Data memory (data)” parameter is set to “2” (to store the weighing data). 

Required setting 

dout prt 

3 Stream 

mode 

 

dout data 

0 

Data memory function is not used. 

 

ba5fnc 5pd 

Display refresh rate 

 

5if bp5 Baud 

rate 

Example 

“For monitoring data on a computer”