A&D GP-100KS User Manual
80
15-3 Using Windows Communication Tools (WinCT)
When Windows is used as an operating system in a personal computer, the provided WinCT
software can be used to transmit the weighing data to the personal computer.
The WinCT software has two communication methods: “RsCom” and “RsKey”. For details on WinCT,
refer to the WinCT instruction manual.
software can be used to transmit the weighing data to the personal computer.
The WinCT software has two communication methods: “RsCom” and “RsKey”. For details on WinCT,
refer to the WinCT instruction manual.
RsCom
Can transmit commands to control the balance.
Can make bi-directional communication between the balance and a personal computer using
Can make bi-directional communication between the balance and a personal computer using
the RS-232C interface.
Can display or store the data using a text file format. Can also print the data using a printer
connected to the personal computer.
connected to the personal computer.
When several ports of a personal computer have balances connected, can communicate with
each balance simultaneously.
Can share a personal computer with other application software.
Can receive the balance GLP report.
Can receive the balance GLP report.
RsKey
Can transmit the weighing data output from the balance directly to other application software
such as Microsoft Excel.
Can be used with most application software.
Can receive the balance GLP report.
Note
Windows and Excel are registered trademarks of Microsoft Corporation.
Windows and Excel are registered trademarks of Microsoft Corporation.
15-4 Using the WinCT software, the balance can do the following:
1 Analyzing the weighing data and the statistics with “RsKey”
The weighing data can be input directly into an Excel worksheet. Then, Excel can analyze the
The weighing data can be input directly into an Excel worksheet. Then, Excel can analyze the
data to obtain total, average, standard deviation, maximum and minimum value, and display
them in a graph.
them in a graph.
2 Controlling the balance using commands from a personal computer
By using “RsCom”, the personal computer sends commands such as “re-zero” or “send
By using “RsCom”, the personal computer sends commands such as “re-zero” or “send
weighing data” to the balance and controls the balance.
3 Printing the balance GLP report using your printer
The balance GLP report can be printed using a printer connected to the personal computer.
The balance GLP report can be printed using a printer connected to the personal computer.
4 Receiving weighing data at a certain interval
The weighing data can be received at a certain interval and data characteristic with elapsed
The weighing data can be received at a certain interval and data characteristic with elapsed
time can be obtained.
5 Using the GP series balance memory function
The data can be stored in the balance’s memory. Of the data stored, the weighing data and
The data can be stored in the balance’s memory. Of the data stored, the weighing data and
calibration data can be transmitted to a personal computer at one time.
6 Using a personal computer as an external indicator
With the “RsKey” test mode function, a personal computer can be used as an external weight
With the “RsKey” test mode function, a personal computer can be used as an external weight
indicator for the balance. (To do this, set the balance data output mode to stream mode.)