Planar D6015TM User Manual
Operations Manual (OM700-02)
9
Connecting the Optional Touchscreen
If your monitor has this optional feature, connect the monitor’s 9-pin D-sub
serial port to your computer’s 9-pin RS232 serial port using the cable which
came with the optional touchscreen package.
serial port to your computer’s 9-pin RS232 serial port using the cable which
came with the optional touchscreen package.
Figure 3: Connecting the Optional Touchscreen Cable
Next connect the male end of the RS232 cable provided with the optional
touchscreen package to the 9-pin serial port at the back of the monitor (refer to
Figure 3).
touchscreen package to the 9-pin serial port at the back of the monitor (refer to
Figure 3).
Note: Please contact your system provider or ELO TouchSystems at
www.elotouch.com for the touchscreen driver and installation instructions.
From the Download Drivers page, select the appropriate platform and
download the driver file and the instruction file. Following driver software
installation, you will need to calibrate your touchscreen to the computer
following the procedure provided by ELO. You can also contact ELO by
telephone at +1(800) 557 1458 extension 4607, or fax +1(510) 790-0627.
www.elotouch.com for the touchscreen driver and installation instructions.
From the Download Drivers page, select the appropriate platform and
download the driver file and the instruction file. Following driver software
installation, you will need to calibrate your touchscreen to the computer
following the procedure provided by ELO. You can also contact ELO by
telephone at +1(800) 557 1458 extension 4607, or fax +1(510) 790-0627.
Positioning
When positioning the monitor, make sure the main ports and sockets are easily
accessible. Mount the monitor on a GCX Instrument Mounting Systems or other
standard VESA swing arm or desk stand, or on an optional desk stand. With the
monitor stand, you need a flat and stable surface (horizontal to ±5
accessible. Mount the monitor on a GCX Instrument Mounting Systems or other
standard VESA swing arm or desk stand, or on an optional desk stand. With the
monitor stand, you need a flat and stable surface (horizontal to ±5
°
) with good
ventilation.
Position the monitor to avoid glare from sunlight or other sources of bright light.
Excessive exposure to heat, moisture, or direct sunlight can damage the monitor.
Excessive exposure to heat, moisture, or direct sunlight can damage the monitor.