A&D GP-100K User Manual

 

 11

Key operation affects how the balance functions. The basic key operations are: 

  “Press and release the key immediately” or “Press the key”   

     = normal key operation during measurement 

  “Press and hold the key” 

         

 

 

 

 

 

 

 

 

 

 

 

 

                     

Each key, when pressed or when pressed and held, functions as follows: 

 

Turns the display ON and OFF. The standby indicator is displayed when the display is 
turned off. The weighing mode is enabled when the display is turned on. 
This key is available anytime. Pressing the key during operation will interrupt the 
operation and turn the display OFF. 

 

In the weighing mode, turns the minimum 
weighing value ON and OFF. 

In the counting or percent mode, enters 
the sample storing mode. 

Enters the function table mode. Refer to 
“9. FUNCTION TABLE”. 

 

Switches the weighing units stored in the 
function table. Refer to “4. WEIGHING 
UNITS”.

 

Performs response adjustment and self 
check. 

 

Performs calibration of the balance using 
the internal mass. 

Displays other items of the calibration 
menu.  

 

Stores the weighing data in memory or 
outputs to a printer or personal computer 
depending on the function table settings. 
(Factory setting = output) 

No function at the factory setting 

By changing the function table: 
Outputs “Title block” and “End block” for 
GLP report. 
Displays the data memory menu. 

 

Sets the display to zero.