Motorola MBP16 User Manual
14
CLEANING
6. CLEANING
Clean MBP16 with a slightly damp cloth or with an anti-
static cloth. Never use cleaning agents or abrasive
solvents.
static cloth. Never use cleaning agents or abrasive
solvents.
Cleaning and care
• Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not covered
by the warranty.
permanent damage to the product which is not covered
by the warranty.
• Keep your MBP16 away from hot, humid areas or
strong sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards of
reliability for your MBP16. However, if something does
go wrong, please do not try to repair it yourself - contact
Customer Service for assistance.
go wrong, please do not try to repair it yourself - contact
Customer Service for assistance.
7. TROUBLESHOOTING
Link light on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly
• Check whether the supplied battery pack is correctly
installed and that it is not drained.
• Recharge the parent unit by connecting it to the power
supply.
Link light on the parent unit flashes
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
but not closer than 5 feet.
• The baby unit may be switched off. Press and hold
0
key to switch on the baby unit.
Low battery light on the parent unit flashes
• Battery pack in the parent unit is running low. Connect
the parent unit to the power outlet with the supplied
power adapter for recharging.
power adapter for recharging.
The parent unit beeps
• Lost connection with the baby unit. Reduce the distance
between the parent unit and the baby unit, but not
closer than 5 feet.
closer than 5 feet.
• The baby unit may be switched off. Press and hold
0
key to switch on the baby unit.