Motorola MBP28/2 User Manual

14

USING YOUR BABY MONITOR

Note
The current temperature at the camera unit is shown on 
the parent unit status bar whenever it is displayed.

There are 3 lullabies available to play for your baby, either 
repeating one lullaby or repeating through all three 
lullabies.
1. Press 

2

 on the camera unit to select the lullaby and 

start playing when the camera is linked with the 
parent unit.

2. During playback, press 

2

 to step through the 

different lullabies. 
OR 
Press 

8

 on the camera unit to start playing the 

selected lullaby. 

3. During playback, press 

9

 to stop playing.

NOTE
Once the camera unit loses the link with the parent unit, 
the lullaby playing will be stopped and will not be resumed 
automatically even if the link is set up again.

The system allows registering up to four camera units. 
You can switch the monitoring camera unit by one-touch 
key or by menu settings.
By one-touch key:
Press 

3

 on the parent unit when it is in video monitoring 

mode. The parent unit will switch to the next registered 
camera unit to monitor your baby. You can switch to other 
registered camera units by further pressing 

3

 if 

necessary, with each registered camera unit being 
selected in turn.
By menu settings:
The system also allows the parent unit to be set to 
automatically switch among all the camera units, with 
each registered camera unit being selected in turn at 
about 30 second intervals. Refer to section 4.6 for the 
instructions of how to set the parent unit to scan through 
all camera units automatically.